Bruce[2].jpg (4158 bytes)
Bruce Roberts-Goodson
EMAIL
HOME PAGE

Illustrated Custom Boatbuilding.
We recommend that you read
 this hardcover book - Order now
 and we will pay the postage.

ROBERTS 35
Center cockpit Trunk cabin version.
 

NEW ! SUPER STUDY BOAT PLANS ... Delivered by DOWNLOAD to your computer within 12 hours of you placing your order. The study plans have lists of materials & equipment etc & these will be useful in costing out the complete boat. Each STUDY PLAN contains ALL the construction drawings for each material - STEEL, ALUMINUM, FIBERGLASS  as applicable to the particular boat plan - with up to 25 sheets per plan!  Lists of materials - Technical information - Numerous construction drawings are all included.

You can view & print the drawings in full or in sections. BUILDING PHOTOS are included in the study plan package. PLUS you receive a FREE (value 79.95) e-book BUILD YOUR OWN BOAT  - When you use your credit or debit card you will be charged at the correct exchange rate in your own currency. 

STUDY PLANS R35 + R36 all versions.  89.95 -99 - $109      

STEP BY STEP ASSEMBLY PHOTOS INCLUDED WITH THE STUDY PLANS & COMPLETE PLANS

SPECIAL INTRODUCTORY OFFER: COMPLETE BOAT PLANS & FULL SIZE FRAME PATTERNS ... Delivered by DOWNLOAD to your computer within 12 hours of you placing your order. The plans have all the information you need to build your own boat.. Each plan contains all the drawings for STEEL & ALUMINUM  or FIBERGLASS construction, plus bonus drawings covering electrical, plumbing and engineering, everything you need to build your boat.

Plus you will receive a DETAIL FOLIO showing how to make many of your own boat fittings, lists of materials and equipment are all included plus all technical information, numerous construction drawings and written building instructions are all included. You can view & print the drawings in full or in sections. BUILDING PHOTOS are included in the plan package. PLUS you receive a FREE (value 79.95) e-book BUILD YOUR OWN SAILBOAT .. Only available at this price if you order off this page.

COMPLETE PLANS & PATTERNS R35   685 - 615- $765  

EMAIL BRUCE ROBERTS DESIGN OFFICE FOR PAYMENT OPTIONS

L.O.A. 10.82 m 35'    6"
L.W.L. 8.41 m 27'    6"
BEAM 3.35 m 11'    0"
DRAFT 1.68 m 5'    6"
SAIL AREA 49.4 sq m 532 sq ft
HEADROOM   1.96 m 6'    5"
DISPL. 5,951 kg 13,120 lb
BALLAST 2,268 kg 5,000 lb
AUX. PWR 33 hp

ROBERTS 35
Center cockpit Trunk cabin version.

 

There are several versions of this boat within the same set of boat plans - all you have to do is decide which material you wish to use to build your Roberts 35.

Options include Aft cabin (as shown here) or aft cockpit (see below) also there is a flush deck version.

Other alternatives include ketch or cutter rigs remember all these options come in the one plan.

 

ROBERTS 35
Center cockpit Trunk cabin version.

Here we see one suggestion as to how to lay-out the accommodation in your center cockpit version.

ROBERTS 35
Aft cockpit - Trunk cabin version.

Here we see one suggestion as to how to lay-out the accommodation in your aft cockpit version.

 

ROBERTS 35
Flush deck version

Here we see the steel raised deck version. You can build this raised deck boat in either MC steel or fiberglass.

ROBERTS 35
Fiberglass or MC Steel

Here we see the galley in the center cockpit version.

ROBERTS 35
Center cockpit Trunk cabin version.

Comfortable center cockpit with ample room to seat 4 adults.

Dear Bruce,
my name is Gary Olsen i live near Bundaberg, Qld. I have recently
purchased a Roberts 35A aft cabin centre cockpit, it was built in 1980 in
south Australia .it has been very well looked after and is in excellent
condition. I have looked at a lot of boats on the internet but have always
liked the Roberts. I plan to sail it to Pluket and live on it. I am very
pleased with the boat as it is my first yacht. Keep up the good work. regards
Gary.

ROBERTS 35
Fiberglass or MC Steel

One builder customized his interior as shown ... you can change the arrangements to suit your requirements.

 

ROBERTS 35
Fiberglass or MC Steel

This attractive fore cabin shows 'ceiling planking' as the method of lining the interior of the hull.

ROBERTS 35
Fiberglass or MC Steel

Here we see the construction of the deck and cabin male mold which consists of deck and cabin top frames and battens covered with either thin inexpensive plywood or hard-board followed by the inner fiberglass laminate, either foam or balsa core is then installed and finally the outer layers of fiberglass are laminated in place. 

STUDY PLAN PACKAGES ON DOWNLOAD or on USB
-
GIVE ACCESS TO MANY step by step BOAT  CONSTRUCTION PHOTOS + PHOTOS OF COMPLETED BOATS ETC.

 

 

Roberts Dinghy
Build in Fiberglass, Plywood or Aluminum

FREE with every set of boat plans and frame patterns you will receive boat plans and full size patterns for the Roberts Dinghy that you can build in fiberglass, plywood or aluminum as shown below.

 


Hard-cover book
   DETAILS
 
59.95 Post paid

Order this book & Email Bruce to claim a
FREE STUDY PLAN OF YOUR CHOICE


e-book download
DETAILS
47.50 DOWNLOAD

Order this book & Email Bruce to claim a
FREE STUDY PLAN OF YOUR CHOICE


Hard-cover book
DETAILS 47.50 post paid

Order this book & Email Bruce to claim a
FREE STUDY PLAN OF YOUR CHOICE

 ORDER CODE  CHOOSING

SAILBOAT DESIGNS    POWERBOAT DESIGNS

   HOME / INDEX PAGE