Bruce[2].jpg (4158 bytes)

Bruce Roberts-Goodson

CONTACT BRUCE BY
 EMAIL
Bruce Roberts Yacht Design
Official BRUCE ROBERTS WEB SITE - DESIGN OFFICE FOUNDED 1966

INCLUDES SPRAYS
& ALL SAILBOATS

+ SAILING TRAWLERS

ORDER STUDY PLANS NOW AND GET THIS BOOK FREE
ORDER study plans

HUGE e-BOOK
1,200 PAGES
302,500 words
10,000 photos
100 sailboat plans

Shows you how to build a sailboat in:

FIBERGLASS
WOOD EPOXY
STEEL & ALU.

DETAILS  ORDER
1,200 PAGE e-book
INCLUDES SPRAYS

& ALL SAILBOATS
€44
 $59.95  £29



Gwenda Roberts-Goodson

HOME PAGE

SUPER STUDY PLANS -  up to THREE STUDY PLANS ON CD.  

These new study plans have lists of materials & equipment required to build and equip your boat ... these lists will help you to cost out the complete building project.
Each CD contains - ALL the drawings of your choices of ONE or TWO or THREE plans with up to 25 sheets per plan! Technical information and Performance graphs are included for many designs. PLEASE indicate the study plans you would like in the SPECIAL INSTRUCTIONS BOX you will find on the order form.
FREE 500 page e-BOOK ... A boatbuilding e-book will be included FREE with your study plans on CD

CONSTRUCTION & COMPLETED BOAT PHOTOS ARE INCLUDED IN THE STUDY PLANS ON CD
INCLUDES LATEST PLAN & KIT PRICES  ... ORDER study plans now
only $99 or 79  or  £55
 

Roberts P.C.F. 40
FIBERGLASS or STEEL Plans and Frame patterns
or STEEL KIT or CUTTING FILES and plans.

Over 200 built and in service world-wide. This design may be built as a motor sailer for family use, or, by adjusting the wheelhouse position, by the professional for fishing or trawling. It has a large fuel and water capacity plus space for a deep freezer. Also, being of full displacement it is also an economical passage maker and is quite capable of crossing oceans safely and surely. It can be built in either steel or fiberglass .... One example was motor sailed from Australia to UK and Ireland.

L.O.A. 12.19 m 40'  0"
L.W.L. 10.67 m 35'  0"
BEAM 3.97 m 13'  0"
DRAFT 1.30 m 4'  3"
DISPLACEMENT 14,061 kg 31,000 lb

 


Roberts P.C.F. 40

The P.C.F 40 is one of my favourite boats and makes an ideal family motor sailer. The hull is based on a trawler design that we built in the 1970's and as with all well designed trawler hulls - this is a great sea boat.

 

You can rig this boat with a variety of sail plans.

Roberts P.C.F. 40

This is the original accomodation plan.

Roberts P.C.F. 40

This is the accomodation plan we have prepared for the new steel KIT version. You can vary the layout to suit yourself.

 

 

Roberts P.C.F. 40

There are over 200 PCF40's currently in service world-wide.

Bruce, looking through your web site I had a pleasant surprise to find my PCF 40 photo's used. If for any reason you would like further information or photo's please do not hesitate to contact me.

I recently, (Easter 2006) spent 5 days on board "MOJO II" heading towards Townsville in some very ordinary weather, 25 to 30 knot wind and 2 to 3m seas, and she handled it with ease.

I have found the boat very sea worthy and economical after travelling from Sydney to the Whitsunday's ( about 1200 nm ) where it now resides, and is used for family holidays.  Warren Goddard
 

 

Roberts P.C.F. 40

The PCF 40 is flush deck forward making for easy anchor handling and plenty of space to stow the dinghy etc.

 

STUDY PLAN PACKAGES ON CD GIVE ACCESS TO HUNDREDS OF step by step BOAT & KIT ASSEMBLY PHOTOS ... See details

Roberts P.C.F. 40

Here we see the spacious living area of the deckhouse - you can lay this area out to suit your personal preference.

 

PCF40-P1.jpg (20796 bytes)

Roberts P.C.F. 40

Another PCF 40 this one owned in Canada by Claude Charland  

 

Roberts P.C.F. 40

Australian Built PCF 40 - This boat was built at our Marine Park boat-yard back in the 70's - the boat is still in service and in recent years has commanded a good re-sale value.

 

Roberts P.C.F. 40

Here we see a steel PCF 40 hull ready for turn over.

The kit version is simpler to build as it is built upright and this saves the turn-over operation. You can start with a KIT or Cutting files and plans and have the kit cut locally.

 

EMAIL     -      ORDERS     -      HOME / INDEX PAGE