Bruce[2].jpg (4158 bytes)

"SEE ABOUT BRUCE"
 EMAIL BRUCE		 Bruce Roberts Yacht Design
 Official BRUCE ROBERTS WEB SITE FOUNDED 1966    

BUILD YOUR POWERBOAT OR TRAWLER
e-BOOK

BUILD YOUR POWERBOAT OR TRAWLER

 e-BOOK .. TEXT & PHOTOS on CD:  You can now read this new 500 PAGE text on your computer or print it out in part or full.  PLUS you will receive hundreds of Powerboat boat building construction and action photos all on easy to read CD  $49.95€44
 ₤29

  SEE DETAILS    ORDER e-BOOK 

Order study plans CD - $99 & get this book FREE      ORDER STUDY PLANS

Gwenda
Roberts-Goodson

STUDY PLANS -  ANY ONE OR TWO OR THREE STUDY PLANS ON CD.

These new super study plans have lists of materials & equipment required to build and equip your boat ... these lists will help you to cost out the complete building project. Each CD contains - ALL the drawings of your choices of ONE or TWO or THREE plans with up to 25 sheets per plan! Technical information and Performance graphs are included for many designs. PLEASE indicate the study plans you would like in the SPECIAL INSTRUCTIONS BOX you will find on the order form.
FREE 400 page e-BOOK BUILD YOUR OWN POWERBOAT OR TRAWLER WITH STUDY PLANS ON CD ORDER ...HUNDREDS OF CONSTRUCTION & COMPLETED BOAT PHOTOS ARE INCLUDED IN THE STUDY PLANS ON CD 

INCLUDES LATEST PLAN & KIT PRICES
ORDER study plans now only $99 or €79  or  £55
 
Voyager TY 57
 SHOAL DRAFT Twin Tunnel Stern ALUMINUM OR STEEL KIT or Cutting files and plans
 This kit is available for building in Steel or Aluminum and the first version has a twin tunnel shoal draft hull designed to operate at up to 25 knots.  We have now delivered the first kit. We also supplied a complete set of windows as part of the package.

NEW PASSAGEMAKING DESIGNS:  This is your opportunity to have your own passagemaking 'Voyager' designed and built at an affordable price. Now is your opportunity to put those pieces together into one boat that you REALLY like ! Consider customizing one of our new designs. Bring us YOUR ideas. We can offer Steel or Aluminum Plans and Cutting files, CUT-TO-SIZE KITS or Part-Built or Complete Boats. The Trawler Yacht 55 is already a popular design and we have sold a number of sets of cutting files and kits for this serious offshore vessel.

These trawlers are designed in accordance with Lloyds  for category 1 (unrestricted operating / sailing area), which is much better than the EU and other Classification Societies and the  CE-A require. Complete stability calculations to USCG offshore requirements are included in the design package. All calculations are also cross referenced against ABS requirements to ensure that the design meets world-wide standards and specifications.

In the case of KITS, all plate parts belonging to the hull, deck and superstructure that are accurately cut to size are included. The parts are marked with the appropriate part number and engraved matching marking lines to assist in the assembly and location of the part in its position. Cutting method is Plasma / Oxygen, ensuring highest accuracy and smooth edges.
 
Plate parts are cut from ... MARINE ALUMINUM OR ...Lloyds approved A Grade Shipbuilding quality STEEL that has been coated with factory applied Sigma weld MC welding primer.  We use and recommend steel plate that has the official designation ISO standard 10474 or EN 10204 with 3.1.B certificate.

FROM BUILDER:
 Hi, By the way, the trawler yacht of Bruce's design that we are currently building is coming along very well.  The quality of the kit parts are the best we have ever seen, and as a result, we are saving time in the build. At present, we have 9 welders/fitters working on the boat in three teams.  We have almost all of the plate hung in place and tacked up.   We anticipate the seam welding will start within a few weeks as there are some details to attend to. But we must say again, that we are very happy with the kit quality.
Hope to hear from you soon ....Brian
L.O.A. 17.57 m 57'    8"
L.W.L. 20.55 m 51'    0"
BEAM 5.53 m 18'    2"
DRAFT (Twin tunnel shoal draft version) 1.52m 4'    0"
DISPLACEMENT (varies depending on version) 29,854 +   65,000 lbs +    
POWER 250 - 1,100 HP

TY57mount-WEB.jpg (19099 bytes)

 Voyager TY 57
Artists impression of the TY 57; you can see that this boat has lived up to the promise shown here.

Voyager TY 57

The client required a guaranteed 20 knots so as is our usual practice, we designed this vessel to perform at the speed required plus a small safety margin ... the results ... This Trawler 57 has now been successfully through her speed trials where she averaged 22 knots as designed and exactly as we predicted considering the power available.

TY57-A4.jpg (19601 bytes)

 Voyager TY 57
Flybridge deck view

TY57-A1.jpg (16444 bytes)

 Voyager TY 57
Salon and pilot house layout

TY57-A2.jpg (21163 bytes)

 Voyager TY 57
Below decks accomodation and engineroom areas.

TY57-A3G.gif (32345 bytes)

 Voyager TY 57
 Note there is excellent headroom in Saloon, Engine room & in Forward sleeping accommodation.

TY-57-01.jpg (28046 bytes)
Voyager TY 57
 Note the tunnels aft - This comes formed as part of the kit.

 

TY57-02.jpg (28872 bytes)


Voyager TY 57
 The hull goes together quickly

STUDY PLAN PACKAGES ON CD GIVE ACCESS TO HUNDREDS OF step by step BOAT & KIT ASSEMBLY PHOTOS ... See details

 

Voyager TY 57
 TY 57 hull deck and superstructure assembled from Bruce Roberts kit.

 

The Voyager TY 57 is available as a kit in either aluminum or steel. If you are interested in a SHOAL DRAFT trawler yacht of this size and style now is the time to join in the design process for YOUR version of this vessel. Options include Aluminum or Steel construction, single or twin engines.

There is generous room available to provide accommodation for two couples plus all the facilities expected by today's cruising yachtsman. Trans-ocean capabilities are a feature of this design.... for more information Contact Bruce today

FROM CUSTOMER: Thank you for answering my message. I have spent 100's of hours researching  different firms and their offerings. Yours is the only one that offers a complete package in the USA.  Again, thank you for your time as other firms only seem willing to respond if you are prepared to spend a great deal of money.  Terry McCarty  ( Terry has now ordered a Voyager 620 package )

LETTER FROM A CUSTOMER WHO IS BUILDING FROM ONE OF OUR KITS.

Hello Bruce,  Hope everything is going well. I can se your home page is growing larger by the minute.  
My boat building is coming along fine. Everything is fitting nicely as it should. My crew is excellent and they are enjoying building a boat like this (regards to restoring old boats).

The yard is next to the  *"Swedish Maritime Administration" and there people were surprised with the speed that the boat has been developing. They thought that we have had 10 persons for several months when in fact we have had three for a couple of weeks.

The hull and deck plates are in place and the wheelhouse is starting to take shape. We are estimating that we will start welding everything within a couple of weeks. We calculate that we will have the boats maiden voyage inn late spring.

If you are going to the Nordic region in the fall or spring, please give us a call I would be proud to show what my crew has done with the kit you supplied. Long mail to get to the point but I wanted to inform you of something positive instead of coming with a lot of questions.
Best regards Andreas Dahlstrand
Add IT / Star Stream Shipping

      BACK TO TRAWLER YACHT KITS INDEX