Boatplans Roberts 39

ROBERTS 39 MC Steel SEE also ROBERTS 392
While this design is available only in multi-chine hull form, rigged as a sloop, we recently designed a radius chined companion ship called the Roberts 392 with very similar layouts.

The Roberts 39 offers luxury cruising for a couple at a reasonable cost, and can be built with either a short keel giving 1.66m (5' 9") draft or a long keel with 1.51m (5' 3") draft. The complete plans and full size patterns include many sheets of large-scale drawings, plus full-size patterns for the hull, deck and cabin top beams, etc.

PRINTED Study plans NOTE: This is a PRE-COMPUTER design so only PRINTED study plans are available for this plan. These are intended to give you an overview of the particular design and include all available Accommodation plans, Sail plans, Material lists & Construction sheets covering available construction materials. All drawings are to scale and you can take measurements from these plans. There are between 6 and 10 sheets of drawings in the typical study plan package. CLICK HERE TO ORDER STUDY PLANS

L.O.D.		11.98 m	39' 4"
L.W.L.		9.88 m	32' 5"
BEAM		3.89 m	12' 9"
DRAFT	short keel	1.75 m	5' 9"
	long keel	1.60 m	5' 3"
DISPLACEMENT		11,249 kg	24,800 lb
BALLAST		3,538 kg	7,800 lb
Stability .. number will vary depending on material and keel option		130 degrees +

	ROBERTS 39 MC Steel The Roberts 39 can be fitted with either CUTTER (shown), sloop or ketch rigs. The plans and study plans show the available sail plans in detail.
	ROBERTS 39 MC Steel The Roberts 39 accomodation plans can be varied to suit your own requirements.
	ROBERTS 39 MC Steel This boat can built with either long or short keel arrangement (as shown) and plans cover both options.
	ROBERTS 39 MC Steel Builders: Dick and Judy Frank To those who couldn't witness the event - all went well with the launching of CORAZON de Acero.
	ROBERTS 39 MC Steel This example was built in USA and after crossing the Atlantic, is now cruising in Europe.
	ROBERTS 39 MC Steel This Roberts 39 is one of the many fine steel boats built in England by Terry Erskine.
	Roberts Dinghy Build in Fiberglass, Plywood or Aluminum FREE with every set of plans and frame patterns you will receive plans and full size patterns for the Roberts Dinghy that you can build in fiberglass, plywood or aluminum as shown below.