Bruce[2].jpg (4158 bytes)
Bruce Roberts-Goodson
EMAIL
HOME PAGE

Illustrated Custom Boatbuilding.
We recommend that you read
 this hardcover book - Order now
 and we will pay the postage.

Centennial Spray 38
    
Boat plans & Full Frame Patterns - Round Bilge Steel, Aluminum or Wood / Epoxy

 Interior of a round bilge steel Centennial Spray 38 was built in Sweden.

 Interior of a round bilge steel Centennial Spray 38 was built in Sweden.

SUPER STUDY BOAT PLANS ... Delivered by DOWNLOAD to your computer within 12 hours of you placing your order.
 
The study plans have lists of materials & equipment etc & these will be useful in costing out the complete boat. Each STUDY PLAN contains ALL the construction drawings for each material - STEEL, ALUMINUM & WOOD EPOXY as applicable to the particular boat plan - with up to 25 sheets per plan!  Lists of materials - Technical information - Numerous construction drawings are all included. You can view & print the drawings in full or in sections. BUILDING PHOTOS are included in the study plan package. e-book BUILD YOUR OWN (Sail or Power) BOAT you receive a FREE ( VALUE £69.00 )



e-book BUILD YOUR OWN (Sail or Power) BOAT ..
  Hundreds of new STEP BY STEP building photographs PLUS photos of CS 38'S included with STUDY PLANS.  STUDY PLAN Centennial Spray 38 + CS 425 - When you use your credit or debit card you will be charged at the correct exchange rate in your own currency.  £59.95 - us$94.75 - €84.75

Please note that when you receive your credit or debit card statement the amount will be converted to YOUR local currency.

 

STEP BY STEP ASSEMBLY PHOTOS INCLUDED WITH THE STUDY PLANS & COMPLETE PLANS

SPECIAL INTRODUCTORY OFFER: COMPLETE BOAT PLANS & FULL SIZE FRAME PATTERNS ... Delivered by DOWNLOAD to your computer within 12 hours of you placing your order.
 
The plans have all the information you need to build your own boat.. Each plan contains all the construction drawings for STEEL, ALUMINUM or WOOD EPOXY construction, plus bonus drawings covering electrical, plumbing and engineering, everything you need to build your boat. Plus you will receive a DETAIL FOLIO showing how to make many of your own boat fittings, lists of materials and equipment are all included plus all technical information, numerous construction drawings and written building instructions are all included. You can view & print the drawings in full or in sections. BUILDING PHOTOS are included in the plan package. PLUS you receive a FREE ( VALUE £69.00 )



e-book BUILD YOUR OWN SAILBOAT .. Only available at this price if you order off this page. PLANS & PATTERNS CENTENNIAL SPRAY 38 
£395 - $595 - €545

As there are over 5,000 Bruce Roberts’ SPRAY SAILBOATS in service world-wide plus another 1,000 SPRAYS being built from our boat plans and patterns.  We have been willing to listen to YOUR ideas about this wonderful boat and several boat plan layouts have been drawn with many features that are interchangeable between the various versions.

The Centennial Sprays are designed for building in Round bilge steel or Wood/Epoxy, and can be rigged with a variety of sail boat plans including a gaff schooner, Bmu cutter, junk rig etc. Custom sail boat plans and additional accommodation layouts may be drawn to suit your requirements for a reasonable fee.

Many of these Sprays have completed complete circumnavigations some more than once & usually with crews consisting only of two persons !

L.O.D. ( HULL ) 11.73 m 38'    6"
L.W.L. 10.08 m 33'    1"
BEAM 4.29 m 14'    1"
DRAFT   1.47 m 4'  10"
DISPLACEMENT 16,174 kg 35,638 lb

Photos by permission of
 Rob McGill and Nina Morissette.

Centennial Spray 38

Complete ... wood epoxy CS38 built in New Zealand. There are step by step construction photos plus some interior construction and completion photos are shown in the 1400 page e-book BUILD YOUR OWN SAILBOAT (Includes all Spray designs etc.)

 

Hi Bruce,

We finally, we have taken time off doing the interior jobs to do a sailing sea trial! A sedate and gentle sail of around 40 nm over 2 days, and our yacht performed wonderfully.

In a steady 20 knots, we didn't bother to run the mizzen and and even partly furled the main, just to "get a feel" for how she handles. Just off the breeze we were easily able to achieve 6 knots, even making 7 knots and better at times.

We had the full main set for an hour or so, and our yacht was well balanced and sailing with very little heel just off the breeze.  Regards Rob McGill and Nina Morissette

 

STUDY PLAN PACKAGES ON DOWNLOAD or on USB
- YOU CHOOSE DOWNLOAD OR USB
. . . GIVE ACCESS TO HUNDREDS OF step by step BOAT & STEEL OR ALUMINUM PLANS & CUTTING FILES ASSEMBLY PHOTOS e-book BUILD YOUR OWN (Sail or Power) BOAT photos of completed boats etc all for the Centennial Spray series.

Centennial Spray 38

This boat can be rigged as a gaff ketch, gaff cutter, Bermudian ketch or cutter plus a variety of other rigs including the Junk schooner etc. All available sail boat plans are shown in the study boat plans on DOWNLOAD or on USB
- YOU CHOOSE DOWNLOAD OR USB
. . .
.

Centennial Spray 38

The interior can be laid out in several different ways ... see one example below as well as cut-away version on left.

CS38-2.gif (8148 bytes)

CS38-3.gif (11383 bytes)

CS38-4.gif (6975 bytes)

Centennial Spray 38

The interior can be laid out in several different ways ... see one example at left as well as cut-away version above.

 

CRUISING IN EMERALD STEEL

SPRAY - Emerald Steel

Spray5.jpg (16051 bytes)

 Round bilge steel Centennial Spray 38 was built in Sweden.

Centennial Spray 38

Here are some comments from a broker in South Africa who sold a Centennial Spray that was built in Vietnam:

Centennial Spray - I sold for original owner,  Entre Deux Mers - She was built in Vietnam - a couple of photos attached (I have more if you would like for your records/files).  The new owners are just lovely and they absolutely love the boat. They are based in Middle East and intend to come over here to Langkawi at every school holiday opportunity - twice already since purchase. Thank you again for your assistance, Kind regards Michele

CS38-P1.jpg (13787 bytes)

Centennial Spray 38

This wood epoxy CS38 was built in New Zealand and there are step by step construction photos shown in our e-book BUILD YOUR OWN SPRAY

CS38-P3.jpg (25210 bytes)

Another view of the hull of the wood epoxy CS38 was built in New Zealand and there are step by step construction photos shown in our e-book BUILD YOUR OWN SPRAY

Almost complete ... wood epoxy CS38 built in New Zealand and there are step by step construction photos shown in our e-book BUILD YOUR OWN SPRAY
Centennial Spray 38
This boat can be built in Round bilge Steel or Wood/Epoxy. Several alternate accommodation and sail boat plans would be possible. A pilot house could also be added. This sketch shows the interior of the "Classic" production version of this design. Round bilge steel hull and decks and complete boats are available. You can build this boat in Round Bilge steel or Wood/Epoxy strip plank.
G'day Bruce,
This weekend our Centennial Spray 38 "Spray Maker" will be blasted ready for the painting and fit out to start.  I have been taking photos along the way so have a good record of the build process, if you are short of material or would like something for the Spray News let me know.  My wife - the writer in the family - will be producing an article or two for the Australian Spray Society so we could use this or a modified version. I thing Spray Maker will be a first in a number of areas, the first Centennial 38 in New Zealand and the first to be junk rigged, so someone in the world of Spray's may be interested. By the way our builder, Bowline Boats, is really impressed with the boat and design and is looking to specialize in this style of yacht. Cheers Pete
Bruce,  What a year.... I have not had time to give you updates on our Spray... I see that you still have the picture on the CS38 page.  Well I WILL send over some new pictures by snail mail.  We have finished the hull and got the first coat or Green gloss on the hull - it looks great, you cant even tell that it is steel it looks that good.
Hi Bruce,   Just thought we'd update you with the progress of our CS38. As of today the 30th of May, we're past halfway through planking the first diagonal layer on the hull. We completed fairing the fore and aft strip planking early last week. We have a small web page up showing progress (of course it IS about 3 weeks out of date, but there's a lag in getting film out of the camera!):  See a Wood/Epoxy CS38 under construction.

  HOME PAGE  -  INDEX PAGE